Articles about "Material"

ZINCALUME Steel Tanks

April 26, 2018
In 1976 ZINCALUME steel was released and quickly became the preferred choice for steel roofs. This steel is made of iron dipped in a special blend of aluminium, zinc and a little silicon and possessed higher corrosion resistance under aerated non-moist conditions. Since late 2013, a next generation of ZINCALUME steel can be purchased with […]

Stainless Steel Tanks

April 26, 2018
Stainless steel (aka inox steel) is derived from the word “inoxydable”. Unlike other steels, will not readily corrode, rust or stain from moisture. The main difference between stainless steel and carbon steel is a chemical element called chromium. Chromium provides a protective shell the neuatralised oxygen seeping into the metal’s surface and causing it to […]

Rotathene “SUPA UV” Poly Tanks

April 26, 2018
Australia has some of the highest levels of UV radiation in the world, and Rotathene® SUPA UV is at the forefront of UV protection technology. The UV stabilizer is evenly distributed through the Polymer and specified for tanks made in accordance with AS/NZS 4766:2006 standards. Rotathene® is made using SUPA UV technology, providing the highest […]

Polyethylene Water Tanks

April 26, 2018
Poly water tanks are one of the most popular tanks on the market today due to their strength, durability and price. Tanks are fabricated through a rotomoulding process where plastic resin is heated up, rotationally spun inside a cast and then cooled and allowed to set. Poly tanks are either rotomoulded: as two pieces that […]

Galvanised Steel Tanks

April 26, 2018
In the past iron coated in a protective zinc alloy (galvanised steel) was the steel of choice of roofs, sheds and the iconic rainwater tank found in the Australian outback. Today, traditional corrugated galvanised steel tanks also compete against more modern steels such as ZINCALUME® and AQUAPLATE® as well as different grades of stainless steel. […]

Fibreglass Water Tanks

April 26, 2018
Fibreglass tanks are far less common than other types of tanks, however two advantages to fibreglass tanks is that they possess a reasonably high heat resistance and are quite inexpensive. That said, if one can find a local distributor, a limited range of shapes and sizes will be on offer. When being manufactured, fibreglass tanks are made […]

Concrete Water Tanks

April 26, 2018
As concrete tanks are made from poured concrete, much flexibility can be offered according to user requirements, their shape and application. Difficult to access sites, shapes and sizes pose little issue since they are constructed onsite. Concrete tanks are often used for underground cisterns, and for industrial sizes tanks up to around 500,000 litres. The […]

AQUAPLATE® Steel Tanks

April 26, 2018
AQUAPLATE® steel is available in unpainted and laminated/pre-painted COLORBOND® steel forms. In laminated or painted form, the steel is comprised of ZINCALUME® steel hot-dipped in 275g/m2 of zinc. The outer side is laminated or coated with a COLORBOND® colour, while the inner side is laminated with a thin poly coating. In unpainted form, the product […]